2000W PowerVerter APS 12VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired

Sale!

$11.61

2000W PowerVerter APS 12VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired

Add to Wishlist
Add to Wishlist
Compare
SKU: APS-2012 Category:

Description

Specifications

OVERVIEW
UPC Code 037332090270
INPUT
Nominal Input Voltage(s) Supported 120V AC
Maximum Input Amps / Watts DC INPUT: Full continuous load – 192A at 12V DC. AC INPUT: 38 amps at 120V AC with full inverter and charger load (21A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output l
Recommended Electrical Service DC INPUT: Requires 12V DC input source capable of delivering 192A for the required duration (when used at full continuous capacity – DC requirements increase during Over-Power and Double-Boost operation).
Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate. User supplies cabling. 4 gauge or larger (see manual). AC INPUT: user supplies hardwire input cabling.
Voltage Compatibility (VAC) 120
Voltage Compatibility (VDC) 12
OUTPUT
Frequency Compatibility 60 Hz
Pure Sine Wave Output No
Output (Watts) 2000
Nominal Output Voltage(s) Supported 120V
Output Receptacles Hardwire
Continuous Output Capacity (Watts) 2000
Peak Output Capacity (Watts) 4000
Output Voltage Regulation LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Output Frequency Regulation 60 Hz (+/- 0.3 Hz)
Overload Protection Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC output loads
BATTERY
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
Expandable Runtime Yes
DC System Voltage (VDC) 12
Battery Pack Accessory (Optional)  98-121  sealed lead acid battery (optional)
Battery Charge 25A/100A (selectable)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4  accessory when used in inverter mode. In AC uninterruptible power mode, “auto/remote” setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 600
PHYSICAL
Material of Construction Polycarbonate
Cooling Method Multi-speed fan
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Shipping Dimensions (hwd / in.) 12.80 x 14.40 x 21.10
Shipping Weight (lbs.) 43.00
Unit Dimensions (hwd / in.) 7.25 x 8.5 x 16.25
Unit Weight (lbs.) 40
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to Battery Mode) 16.6 milliseconds (typical – compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V – see manual)
High Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 – see manual)
FEATURES & SPECIFICATIONS
Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
WARRANTY & SUPPORT
Product Warranty Period (U.S. & Canada) 1-year limited warranty

Additional information

Weight 19.5 kg
Dimensions 32.51 × 36.57 × 53.59 cm
Brand

Related products