2000W APS INT Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, Hardwired

Sale!

$11.78

2000W APS INT Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, Hardwired

Add to Wishlist
Add to Wishlist
Compare
SKU: APSINT-2012 Category:

Description

Specifications

OVERVIEW
UPC Code 037332090331
INPUT
Nominal Input Voltage(s) Supported 230V AC
Maximum Input Amps / Watts DC INPUT: Full continuous load – 192A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points – see manual for setting instructions)
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 192A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage Compatibility (VAC) 230
Voltage Compatibility (VDC) 12
Input Frequency 50Hz
OUTPUT
Frequency Compatibility 50 Hz
Pure Sine Wave Output No
Output (Watts) 2000
Nominal Output Voltage(s) Supported 230V
Output Receptacles Hardwire
Continuous Output Capacity (Watts) 2000
Peak Output Capacity (Watts) 4000
Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads
BATTERY
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
Expandable Runtime Yes
DC System Voltage (VDC) 12
Battery Pack Accessory (Optional)  98-121  sealed lead acid battery (optional)
Battery Charge Selectable 15 / 60 amp
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4  accessory when used in inverter mode. In AC uninterruptible power mode, “auto/remote” setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads.
PHYSICAL
Material of Construction Polycarbonate
Cooling Method Multi-speed fan
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Shipping Dimensions (hwd / in.) 13.25 x 15.00 x 21.13
Shipping Weight (lbs.) 46.00
Unit Dimensions (hwd / in.) 7 x 8.5 x 14
Unit Weight (lbs.) 42
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to Battery Mode) 20 milliseconds (typical – compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V – see manual)
High Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 – see manual)
FEATURES & SPECIFICATIONS
Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
WARRANTY & SUPPORT
Product Warranty Period (U.S. & Canada) 1-year limited warranty

Additional information

Weight 20.86 kg
Dimensions 33.65 × 38.1 × 53.67 cm
Brand

Related products