1250W APS X Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, 2 C13 Outlets

Sale!

$7.94

1250W APS X Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, 2 C13 Outlets

Add to Wishlist
Add to Wishlist
Compare
SKU: APSX-1250 Category:

Description

Specifications

OVERVIEW
UPC Code 037332121660
INPUT
Nominal Input Voltage(s) Supported 230V AC
Maximum Input Amps / Watts DC INPUT: Full continuous load – 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points – see manual for setting instructions)
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT: 230VAC
Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection
Voltage Compatibility (VAC) 230
Voltage Compatibility (VDC) 12
OUTPUT
Frequency Compatibility 50 Hz
Pure Sine Wave Output No
Output (Watts) 1250
Nominal Output Voltage(s) Supported 230V
Output Receptacles (2) Universal outlets
Continuous Output Capacity (Watts) 1250
Peak Output Capacity (Watts) 2500
Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 5A input breaker dedicated to the charging system and 6A output breaker for AC output loads
BATTERY
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
Expandable Runtime Yes
DC System Voltage (VDC) 12
Battery Pack Accessory (Optional)  98-121  sealed lead acid battery (optional)
Battery Charge Selectable 7.5 / 30 amp with 1/2 cycle transfer time
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4  accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 1020
PHYSICAL
Material of Construction Polycarbonate
Cooling Method Multi-speed fan
Form Factors Supported Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional mounting information)
Shipping Dimensions (hwd / in.) 12.50 x 11.00 x 10.75
Shipping Weight (lbs.) 26.00
Unit Dimensions (hwd / in.) 7 x 8.75 x 9
Unit Weight (lbs.) 24
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to Battery Mode) 10 milliseconds (typical – compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V – see manual)
High Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 272
STANDARDS & COMPLIANCE
Product Compliance RoHS
WARRANTY & SUPPORT
Product Warranty Period (U.S. & Canada) 1-year limited warranty

Additional information

Weight 11.79 kg
Dimensions 31.75 × 27.94 × 27.3 cm
Brand

Related products