6000W APS X Series 48VDC 208/230V Inverter/Charger with Pure Sine-Wave Output, AVR, Hardwired

Sale!

$29.42

6000W APS X Series 48VDC 208/230V Inverter/Charger with Pure Sine-Wave Output, AVR, Hardwired

Add to Wishlist
Add to Wishlist
Compare
SKU: APSX6048VR-NET Category:

Description

Specifications

OVERVIEW
UPC Code 037332137838
INPUT
Nominal Input Voltage(s) Supported 208V AC; 230V AC
Recommended Electrical Service DC INPUT: Requires 48VDC input source capable of delivering 138A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 250A minimum battery system fusing is recommended.
Input Connection Type DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in terminal strip with cover plate
Voltage Compatibility (VAC) 208; 230
Voltage Compatibility (VDC) 48
OUTPUT
Frequency Compatibility 50 / 60 Hz
Pure Sine Wave Output Yes
Output (Watts) 6000
Nominal Output Voltage(s) Supported 208V; 230V
Output Receptacles Hardwire
Continuous Output Capacity (Watts) 6000
Peak Output Capacity (Watts) 12000
Output Voltage Regulation LINE POWER (AC): Maintains 208/230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 208/230 VAC (+/-5%).
Output Frequency Regulation 50/60 Hz (+/- 0.3 Hz)
BATTERY
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
Expandable Runtime Yes
DC System Voltage (VDC) 48
Battery Pack Accessory (Optional)  98-121  sealed lead acid battery (optional)
Battery Charge Selectable 23 / 90 amp
VOLTAGE REGULATION
Voltage Regulation Description Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Overvoltage Correction Input voltages above 252V are automatically reduced by 9% (230V) / Input voltages above 235/245V are automatically reduced by 10% (208V)
Brownout Correction Input voltages from 208V -189V are automatically boosted by 11% (230V) / Input voltages from 188V-166V are automatically boosted 12% (208V)
Severe Brownout Correction Input voltages from 188V – 171V are automatically boosted by 26% (230V only)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4  accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads. Configuration dipswitches set unit voltage, frequency, transfer-time, battery type, and charger-related settings.
PHYSICAL
Material of Construction Metal
Cooling Method Dual multi-speed fans
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Shipping Dimensions (hwd / in.) 16.00 x 14.50 x 23.25
Shipping Weight (lbs.) 131.00
Unit Dimensions (hwd / in.) 10 x 19.5 x 9
Unit Weight (lbs.) 106.50
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
COMMUNICATIONS
SNMP Compatibility Optional  SNMPWEBSOLOHV  accessory card enables remote monitoring of the unit via SNMP, SSH, telnet or Internet.
Communications Interface Contact closure; DB9 Serial
LINE / BATTERY TRANSFER
Transfer Time (Line Power to Battery Mode) Dip-switch selectable 20 millisecond (full cycle) / 10 millisecond (half-cycle) transfer times which are compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications
Low Voltage Transfer to Battery Power In 230V AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable to 180V). In 208V AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 165V (user adjustable to 175V)-see manual
High Voltage Transfer to Battery Power In 230V AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable to 270 – see manual), In 208V AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 235V (user adjustable to 245V-see manual)
FEATURES & SPECIFICATIONS
TVSS Grounding Main grounding lug connects inverter/charger to earth or vehicle chassis ground
Generator Start Compatibility RJ-11 port connects to a generator with user-supplied cable to automatically cycle generator when battery level is low
Battery Temperature Sensor RJ-11 port connects to optional battery temperature sensor cable to regulate the charging system based on battery temperature
STANDARDS & COMPLIANCE
Product Certifications IEC/EN 62040
Product Compliance RoHS; CE (Europe)
WARRANTY & SUPPORT
Product Warranty Period (Worldwide) 2-year limited warranty

Additional information

Weight 59.42 kg
Dimensions 40.64 × 36.83 × 59.05 cm
Brand

Related products