SmartOnline 120V 2.2kVA 1.6kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, Pre-installed WEBCARDLX network interface, USB, DB9 Serial

Sale!

$3,640.56

SmartOnline 120V 2.2kVA 1.6kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, Pre-installed WEBCARDLX network interface, USB, DB9 Serial

Add to Wishlist
Add to Wishlist
Compare
SKU: SU2200RTXL2UN Category:

Description

Tripp-Lite SU2200RTXL2UN | SmartOnline 120V 2.2kVA 1.6kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, Pre-installed WEBCARDLX network interface, USB, DB9 Serial

https://www.alldataresource.com/assets/images_commscope/features.jpg

Features

  • Tripp Lite SU2200RTXL2UN 2200VA / 2.2kVA / 1600W on-line, double-conversion 3U rackmount UPS
  • 120V output (120V factory preset)
  • NEMA 5-20P input, 6 NEMA 5-15/20R & 1 L5-20R
  • Two switched 3-outlet load banks support remote reboot or programmable load shedding options
  • Supports 2% output voltage regulation and zero transfer time in double conversion mode
  • Economy mode option offers enhanced efficiency operation, reduced power consumption and lower BTU emissions
  • 14 minutes runtime at 50% load (800W) and 4.5 minutes at 100% load (1600W) with internal batteries
  • BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs available (some configurations require Tripp Lite’s External Battery Configuration Software)
  • Intelligent battery management system extends battery life
  • LED Display reports UPS operating mode, line power availability, battery mode operation, inverter status and output power availability
  • Audible alarm with push-button momentary alarm-cancel
  • 4 post installation hardware included, Optional 2POSTRMKITWM enables 2 post rack installation
  • Single line TEL / Network surge suppression
  • Electronic bypass maintains utility output during a variety of UPS fault conditions
  • Network interfaces support communications via built-in USB, DB9 serial / contact-closure and pre-installed WEBCARDLX network management card
  • WEBCARDLX interface allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
  • Optional E2 sensors enable site monitoring of temperature, humidity and contact-closure status
  • Reduce Service Calls with Auto Probe Autonomous Device Management
  • .
  • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
  • HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert
https://www.alldataresource.com/assets/images_tripplite/overview.jpg

Overview

UPC Code 37332181480
UPS Type On-Line
https://www.alldataresource.com/assets/images_commscope/specs.jpg

Input

Rated input current (Maximum Load) 16A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-20P
Input Circuit Breakers 30A
UPS Input Cord Length (ft.) 10
UPS Input Cord Length Details Built-in
https://www.alldataresource.com/assets/images_commscope/specs.jpg

Output

Output Volt Amp Capacity (VA) 2200
Output kVA Capacity (kVA) 2.2
Output Watt Capacity (Watts) 1600
Output kW Capacity (kW) 1.6
Output Capacity Details OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150% load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits)
Power Factor 0.7
Crest Factor 3:1
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start
Output Voltage Regulation (Line Mode) +/- 2%
https://www.alldataresource.com/assets/images_commscope/specs.jpg

Battery

Battery Type Valve Regulated Lead Acid (VRLA)
Full Load Runtime (min.) 4.5 min. (1600w)
Half Load Runtime (min.) 14 min. (800w)
Expandable Battery Runtime Extended runtime supported via optional external battery packs
Expandable Runtime Yes
https://www.alldataresource.com/assets/images_commscope/specs.jpg

Voltage Regulation

Voltage Regulation Description Online, double-conversion power conditioning
Overvoltage Correction 2% output voltage regulation during overvoltages to 150
https://www.alldataresource.com/assets/images_commscope/specs.jpg

User Interface, Alerts & Controls

Switches 2 switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
https://www.alldataresource.com/assets/images_commscope/specs.jpg

Surge / Noise Suppression

UPS AC Suppression Joule Rating 570
UPS AC Suppression Response Time Instantaneous
UPS Dataline Suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC Noise Suppression Yes
https://www.alldataresource.com/assets/images_commscope/specs.jpg

Communications

Network Management Cards WEBCARDLX
Network Monitoring Port Description Includes pre-installed WEBCARDLX Network Management Card; DB9 port supports RS232 and contact closure communications; Economy-mode setting option is available using PowerAlert software and DB9 Serial cable connection OR installed Network Management Card
PowerAlert Software For local monitoring via the UPS’s built-in communication ports; download PowerAlert Local software at https://www.tripplite.com/poweralert
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application; OS and hard-reboot restart options for remote applications
EPO Port RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems
Communications Interface Contact closure; DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled)
https://www.alldataresource.com/assets/images_commscope/pdf.jpg

Documents and Downloads

SU2200RTXL2UN runtime chart Click to View
Owner’s Manual for SmartOnline Rack/Tower UPS Click to View
Installation Guide for Select Rackmount UPS Click to View
Owner’s Manual Addendum for External Battery Packs (Multi-Language) Click to View
Integrated Solutions Brochure (English) Click to View
Auto Probe Solution for Monitoring and Rebooting Locked-Up Devices (English) Click to View
SNMP Management of Tripp Lite Devices Technical Application Bulletin (English) Click to View
EC Declaration Click to View
UPS Sizing Click to View
Top 12 Questions to Consider When Choosing UPS Systems for Network/Server Applications Click to View
UPS Systems Buying Guide Click to View
Custom Products from Tripp Lite Are One Call Away Click to View
Economy Mode Explained Click to View
Product Videos Click to View

Additional information

Weight 27.21 kg
Dimensions 23.11 × 51.3 × 59.69 cm
Brand