SmartOnline 208/120V UPS With Step-Down Transformer – On-Line Double-Conversion, 3000VA 2700W, 4U, Network Card Option

Description

Specifications connected equipment powered and operational, even during UPS fault conditions. Automatically Turns Back On When Power Is RestoredBattery-independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement. Intuitive Front-Panel Interface for Convenient UPS Operation and MonitoringThe front-panel LCD screen reports UPS operating mode, detailed UPS status and site-power information, as well as a variety of advanced UPS setup and configuration options. LEDs indicate AC input/output, battery and fault status. Advanced Communications Ports Allow for Automatic Saves and ShutdownsRS-232 and HIDcompliant USB ports connect to a computer running Tripp Lite’s free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. An EPO port connects the UPS to a contact closure switch to enable emergency inverter shutdown. Cables are included. Optional WEBCARDLX Network Interface Offers 24/7 AccessAn accessory slot accommodates the optional Java-free HTML5-based WEBCARDLX (sold separately) that enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime. WEBCARDLX 15.5.2 or later is required to use the Auto Probe feature, which can prevent costly service calls by automatically rebooting non-responsive network devices. Versatile Installation Options in Your Data Center or Network ClosetHardware is included for mounting the UPS system and transformer in 4U of space in an EIA-standard 19-inch 4-post rack. Use two optional 2POSTRMKITWM kits for 2-post rack mounting or the optional 2-9USTAND for mounting in an upright tower position (both accessories sold separately). The 10-ft. (3.05 m) input power cord with NEMA L6-20P plug connects to any compatible AC outlet. OVERVIEW UPC Code037332241719 UPS TypeOn-Line INPUT Rated input current (Maximum Load)14.97A Nominal Input Voltage(s) Supported208V AC UPS Input Connection TypeL6-20P UPS Input Cord Length (ft.)10 UPS Input Cord Length (m)3.1 Recommended Electrical Service208V 20A Input PhaseSingle-Phase OUTPUT Output Volt Amp Capacity (VA)3000 Output Capacity (kVA)3 2 / 6Output Watt Capacity (Watts)2700 Output kW Capacity (kW)2.7 Output Capacity DetailsOVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% for 3 minutes, 150% for 30 seconds and >150% for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits). Power Factor0.9 Crest Factor3:1 Nominal Voltage DetailsIMPORTANT! Please ensure the UPS is configured for 208V output when used with the included step-down transformer module Frequency Compatibility60 Hz Frequency Compatibility DetailsIMPORTANT! Please ensure the UPS is configured for 60Hz output when used with the included step-down transformer module Output Voltage Regulation (Line Mode)+/- 2% Output Voltage Regulation (Economy Line Mode)+/- 10% Output Voltage Regulation (Battery Mode)+/- 2% Load Management ReceptaclesTwo switchable outlet load banks (2 NEMA 6-15/20R outlets per bank) Output Circuit BreakersIncluded 2U transformer module includes four 20A 120V circuit breakers (each protects 3 NEMA 5-15/20R outlets). Output AC Waveform (AC Mode)Pure Sine wave Output AC Waveform (Battery Mode)Pure Sine wave Nominal Output Voltage(s) Supported120V; 208V Output Receptacles(12) 5-15/20R; (6) 6-15/20R; (2) L6-20R Individually Controllable Load BanksYes BATTERY Battery TypeValve Regulated Lead Acid (VRLA) Full Load Runtime (min.)5 min. (2700w) Half Load Runtime (min.)13.5 min. (1350w) Expandable Battery RuntimeSupports extended runtime with optional external battery packs Expandable RuntimeYes External Battery Pack Compatibility&nbsp;<a class=”productLink” href=”//www.tripplite.com/External-72V-2U-RackTower-Battery-Pack-for-Select-TrippLite-UPS-Systems~BP72V15-2U”>BP72V15-2U</a>&nbsp; (limit 1); &nbsp;<a class=”productLink” href=”//www.tripplite.com/External-72V-3U-Rack-Tower-Battery-Pack-Select-Tripp-Lite-UPS-systems~BP72V28RT3U”>BP72V28RT-3U</a>&nbsp; (multi-pack compatible); &nbsp;<a class=”productLink” href=”//www.tripplite.com/External-72V-2U-Rack-Tower-Battery-Pack-for-Tripp-Lite-UPS-Systems~BP72V182US”>BP72V18-2US</a>&nbsp; (multi-pack compatible) DC System Voltage (VDC)72 Battery Recharge Rate (Included Batteries)3.0 hours from 10% to 90% (typical, full load discharge) Battery AccessFront panel battery access door 3 / 6Internal UPS Replacement Battery Cartridge &nbsp;<a class=”productLink” href=”//www.tripplite.com/Replacement-Battery-Cartridge-72V-Tripp-Lite-SmartOnlineUPS-Systems~RBC72S”>RBC72S</a>&nbsp; Battery Replacement DescriptionHot-swappable, replaceable batteries VOLTAGE REGULATION Voltage Regulation DescriptionOnline, double-conversion power conditioning Overvoltage Correction2% output voltage regulation during overvoltages to 288 Undervoltage Correction2% output voltage regulation during undervoltages to 160V (100% load), 130V (70% load), 100V (30% load) USER INTERFACE, ALERTS & CONTROLS Front Panel LCD DisplayInteractive front-panel LCD interface reports UPS operating mode, detailed UPS status and site-power information; LCD interface also enables a variety of advanced UPS setup and configuration options Switches5 front panel switches: On/Off, Up, Down and Escape Alarm Cancel OperationPower-fail alarm can be silenced by following on-screen prompts Audible AlarmAudible alarm indicates power failure, low battery, overload and fault LED Indicators4 front panel LEDs: AC input (green), AC output (green), Battery (yellow), Fault (red) SURGE / NOISE SUPPRESSION UPS Dataline Suppression DetailsSingle line dialup / network dataline protection included EMI / RFI AC Noise SuppressionYes AC Suppression Joule Rating570 AC Suppression Response TimeInstantaneous PHYSICAL Primary Form FactorRackmount Cooling MethodFan Included Mounting Accessory Description4 post installation accessories included (2 sets) Installation Form Factors Supported with Included Accessories4 post 19 inch rackmount Installation Form Factors Supported with Optional Accessories 2 post rackmount (&nbsp;<a class=”productLink” href=”//www.tripplite.com/2-Post-Rack-Mount-Wall-Mount-AdapterKit-select-Rack-Mount-UPS-Systems~2POSTRMKITWM”>2POSTRMKITWM</a>&nbsp;); Tower (&nbsp;<a class=”productLink” href=”//www.tripplite.com/2U-9U-Tower-Stand-Kit-select-Rack-Mount-UPS-Systems~29USTAND”>2-9USTAND</a>&nbsp;) Minimum Required Rack Depth with External Battery Pack (cm)77 Minimum Required Rack Depth with External Battery Pack (in.)30.25 Minimum Required Rack Depth without External Battery Pack (cm)74 Minimum Required Rack Depth without External Battery Pack (in.)29.25 4 / 6Optional Mounting Accessory NotesQuantity two &nbsp;<a class=”productLink” href=”//www.tripplite.com/2-Post-Rack-Mount-Wall-Mount-Adapter-Kitselect-Rack-Mount-UPS-Systems~2POSTRMKITWM”>2POSTRMKITWM</a>&nbsp; accessories are required for 2 post rackmount installation; Quantity one &nbsp;<a class=”productLink” href=”//www.tripplite.com/2U-9U-TowerStand-Kit-select-Rack-Mount-UPS-Systems~2-9USTAND”>2-9USTAND</a>&nbsp; accessory required for upright tower installation Primary UPS Depth (mm)616 Primary UPS Height (mm)177 Primary UPS Width (mm)440 Rack Height4U Shipping Dimensions (hwd / in.)37.75 x 40.00 x 48.00 Shipping Weight (kg)87.09 UPS Housing MaterialMetal UPS Power Module Dimensions (hwd, in.)6.96 x 17.34 x 24.25 UPS Power Module Weight (kg)60.70 UPS Power Module Weight (lbs.)133.82 ENVIRONMENTAL Operating Temperature Range+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. Storage Temperature Range+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius. Relative Humidity5 to 95%, non-condensing AC Mode BTU / Hr. (Full Load)933 AC Economy Mode BTU / Hr. (Full Load)588 Battery Mode BTU / Hr. (Full Load)1399 AC Mode Efficiency Rating (100% Load)>90% AC Economy Mode Efficiency Rating (100% Load)>95% Audible Noise<50dB at front side 1M COMMUNICATIONS Network Management CardsSNMPWEBCARD; &nbsp;<a class=”productLink” href=”//www.tripplite.com/Web-Management-AccessoryCard~WEBCARDLX”>WEBCARDLX</a>&nbsp; Network Monitoring Port DescriptionSupports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 plus assignable contact closure pin functions for On-battery, On bypass, Output-on and Low-battery conditions and remote Shutdown, Output-off, Reboot and Power-toggle operations PowerAlert SoftwareFor local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at https://www.tripplite.com/poweralert Communications CableUSB and DB9 cabling included WatchDog CompatibilitySupports Watchdog application, OS and hard-reboot restart options for remote applications Network Management Card DescriptionNetwork management card optional 5 / 6 © 2022 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite’s testing agencies: https://www.tripplite.com/products/product-certification-agencies Communications InterfaceContact closure; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled) LINE / BATTERY TRANSFER Transfer TimeNo transfer time (0 ms.) in online, double-conversion mode; 4 ms. transfer time during economy mode operation Low Voltage Transfer to Battery Power (Setpoint)160V (100% load), 140V (66% load), 120V (33% load) High Voltage Transfer to Battery Power (Setpoint)288V FEATURES & SPECIFICATIONS Grounding LugBack panel grounding lug included Cold Start (Startup in Battery Mode During a Power Failure)Cold-start operation supported High Availability UPS FeaturesAuto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic inverter bypass; Expandable battery backup; Hot swappable batteries; On-Line/Double-Conversion; Remote management; Sine wave output; Surge/noise protection; Zero transfer time Green Energy-Saving FeaturesHigh efficiency economy mode operation; Individually controllable load banks STANDARDS & COMPLIANCE Product CertificationsCSA (Canada); NOM (Mexico); UL 1778 Product ComplianceRoHS; FCC Part 15 Class A (USA) WARRANTY Product Warranty Period (Worldwide)2-year limited warranty Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000&nbsp;<a class=”insuranceLink” href=”//www.tripplite.com/support/insurance-policy”>Ultimate Lifetime Insurance</a>&nbsp;